Cyclekart Club of Australia Logo                      
   
Forums
Build Pages
Groups
Photos
Videos
Events
Resources
Filter
Show results from selected filters below:
|
Suggested keywords
x
Loading cover... Drag cover to reposition
Simonism

Simonism

  Registered Users Last seen online, 3 years ago
Cyclekartiste Points Achiever Happy Snapper Story Teller
Timeline
About
Forum Posts
Build Pages
Groups
Albums
Videos
More    
  •   Simonism commented on this post about 3 years ago
    Simonism
    Simonism
    Editing
    Bought some 6mm stainless for brake (and maybe throttle) actuator/s (2m for $10). Fabbed the pedal mounts. Nothing takes quick!
    Have fun!
    Simon
    pedal mounts
    0
    0
    0
    0
    0
    0
    Comments (5)
    • Geoff
      Geoff
      They look great. Any chance you could share a couple more pictures to get more of an idea how you made the mounts?
      3 years ago
      Reported
    • Simonism
      Simonism
      Geoff - the mounts are simple. They are just a short length of 25x25x1.6 square tube, with the ends folded over and welded closed, then the weldsGeoff - the mounts are simple. They are just a short length of 25x25x1.6 square tube, with the ends folded over and welded closed, then the welds cleaned up with a flapper disc. Since the picture was taken, I've drilled two 8mm holes through each mount, to bolts them to my plywood floor pan.   More ...
      3 years ago
      Reported
    • Geoff
      Geoff
      Thanks mate.
      3 years ago
      Reported
    • Mick
      Mick
      I agree those look the business.

      Are you running a hydraulic brake? I got a regular hydraulic brake for mine but the 'hose' is too short so II agree those look the business.

      Are you running a hydraulic brake? I got a regular hydraulic brake for mine but the 'hose' is too short so I figured I'd need to source a longer hose or run some hard lines. Interested to see how you are doing yours.
        More ...
      3 years ago
      Reported
    • Simonism
      Simonism
      Yes Mick. Maybe a 6mm disc is overkill? It's brake kit is from CPR. Here's my install mock-up. I thought about getting a longer hose but you'veYes Mick. Maybe a 6mm disc is overkill? It's brake kit is from CPR. Here's my install mock-up. I thought about getting a longer hose but you've got to have some kind of mechanical connection between the pedal and the master cylinder so I thought it may as well be a long one!
      Simon        More ...
      3 years ago
      Reported
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
Unable to load tooltip content.

 

The Cyclekart Club of Australia acknowledges the Traditional Custodians of country and their connections to land, sea and community. 

We pay respect to Elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.

 

The Cyclekart Club of Australia Incorporated